This is Google's cache of It is a snapshot of the page as it appeared on Jul 15, 2018 16:45:24 GMT. The current page could have changed in the meantime. Learn more.
Full versionText-only versionView source
Tip: To quickly find your search term on this page, press Ctrl+F or ⌘-F (Mac) and use the find bar.
Getting Stared with Your Printrbelt | Printrbot

Getting Stared with Your Printrbelt


  • Click here to download exploded view pdfs.  Use them to inform you as you assemble your Printrbelt.
  • Click here to access the Printrbelt A360 design file.
  • Click here to download Blackbelt Cura control software that will slice your models properly for your Printrbelt.
  • Click here to download STL files – printable parts for your Printrbelt.


Software Setup

After downloading Blackbelt Cura, open the software and add a new printer.  Select BLACKBELT 3D > BLACKBELT 3D Printer.  After adding the printer, make the following adjustments.

Adjust Gantry Angle to 35º

Adjust Start Gcode
  • Go to Machine Settings and make the following changes.
    • X (Width) = 150
    • Z (Height) = 105