Venator Technologies
  • About Us
  • Electronics
    • Tic Tac Toe Soldering Kit
    • Blackjack Soldering Kit
    • Audio Switch Kit
    • D6 Soldering Kit
    • Breadboard Arduino
    • Voltmeter Soldering Kit
    • Binary Decoder Soldering Kit
  • Manufacturing
  • Contact Us

Binary Decoder Kit
Section 1: Introduction

Version 0.9 for Kit Version 1.5, June 2021
Return to Table of Contents
Next Section ->

Thank you!

Thank you for purchasing the Binary Decoder Soldering Kit by Venator Technologies! This kit will teach you how to solder while constructing a useful tool.
Please be sure to read all instructions before assembling or using the Binary Decoder. Important safety information can be found below.

Important Safety Information

While all parts of this kit are ROHS-compliant, most solder contains lead or other dangerous materials. Please do not eat or drink while assembling or using this kit, and wash your hands after handling the board.
Only solder in a well-ventilated area while wearing safety glasses. It is strongly recommended that you solder directly in front of a soldering fume extractor to help remove any fumes from the heated solder.
While soldering, the soldering iron, solder, PCB, and electrical component may become dangerously hot. Solder on a non-flammable surface, with no flammable materials at your work space, and always be cognizant of where your soldering iron is.
The PCB in this kit uses a fiberglass core. Do not attempt to cut, scratch, or break the PCB, as it may introduce fiberglass particles into the air. 
Special Edition PCBs are manufactured connected then separated afterwards. Watch out for the sharp fiberglass edges where they were connected. 
Connecting power to the USB port with the 5v and ground pins shorted may cause damaged to whatever the Binary Decoder is plugged into. Be sure that there are no shorts and the board is properly assembled before plugging in power.

Kit Contents

We include a few spares of some parts in case there are any issues. Need more spare parts? Contact us!
 Main Kit Items
Quantity
Printed Circuit Board​
1
Self-Healing Fuse
1
USB-C Port
1
Programming Port
1
10k 1206 Resistor
11
5.1k 1206 Resistor
2
1206 LED
9
430R Resistor
10
100R Resistor
7
MCP23017 I/O Expander
1
100nF 1206 Capacitor
2
7 Segment Display
1
6mm Button
11
AtTiny 816 Microcontroller
1
Programming Wire
1
Power Board Items
Quantity
Printed Circuit Board
1
22uF Capacitor
4
Programming Port
1
Diode
2
Self-Healing Fuse
1
3.3uH Inductor
1
1206 LED
1
33k Resistor
1
100k Resistor
1
430R Resistor
1
Switch
1
Boost Controller
1
AA Battery Clip
4
Board Standoff
4
Power Board Cable
1
Return to Table of Contents
Next Section ->

Contact Us

Copyright 2020 - Venator Technologies LLC
  • About Us
  • Electronics
    • Tic Tac Toe Soldering Kit
    • Blackjack Soldering Kit
    • Audio Switch Kit
    • D6 Soldering Kit
    • Breadboard Arduino
    • Voltmeter Soldering Kit
    • Binary Decoder Soldering Kit
  • Manufacturing
  • Contact Us